Villager VGS 380 PRIME, Original Owner'S Manual, Page: 35 / 157

Villager VGS 380 PRIME (GB)
5
7. Keep all parts of your body away from the saw chain when the
engine is running.
8. Before you start the engine, make sure the saw chain is not
contacting anything.
9. Always carry the chain saw with the engine stopped, the guide bar
and saw chain to the rear, and the muffler away from your body.
10. Always inspect the chain saw before each use for worn, loose, of
damaged parts. Never operate a chain saw that is damaged,
improperly adjusted, or is not completely and securely assembled.
Be sure that the saw chain stops moving when the throttle control
trigger is released.
11. All chain saw service, other than the items listed in the Owner’s
Manual, should be performed by competent chain saw service
personnel.(E.g., if improper tools are used to remove the flywheel,
or if an improper tool is used to hold the flywheel in order to remove
the clutch ,structural damage to the flywheel in order to remove the
clutch, structural damage to the flywheel could occur which could
subsequently cause the flywheel to disintegrate).
12. Always shut off the engine before setting it down.
13. Use extreme caution when cutting small size brush and saplings
because slender material may catch the saw chain and be whipped
toward you or pull you off balance.