Villager VGS 380 PRIME, Original Owner'S Manual

Page: 45 / 157

Villager VGS 380 PRIME (GB)
15
Choke knob
4. While holding the saw unit securely on the ground, pull the starter rope vigorously.
5. When engine has ignited, first push in the choke knob to the first-stage position and
then pull the starter again to start the engine.
6. Allow the engine to warm up with the throttle lever pulled slightly.
Note: When restarting immediately alter stopping the engine, set the Choke knob in
the first-stage position (choke open and throttle lever In the starting position).
Note: Once the choke knob has been pulled out. it will not return to the operating
position even it you press down on it with your finger When you wish to return the
choke knob to the operating position, pull out the throttle lever instead.
Do not start the engine while the chain saw hangs in one hand. The saw chain
may touch your body. This in very dangerous.
Keep clear of the saw chain as it will start rotating upon starting of engine.