Village LW-160, User Manual And Reference Manual

Page: 62 / 79

21
Fig. 7: Manifold Assembly
INLET/DISCHARGE ADAPTER O-RING REPLACEMENT 708-3 & 708-5
You will need these tools and parts to do the following:
3/4” Socket/ Socket Wrench
Pick
O-Ring, Discharge Plug Adapter (48): PN. 30-1286
Silicone Grease Lubricant: PN. 21-1122
Anti-Seize Lubricant: PN. 85-0094
Remove the Discharge/Plug (50) and (49) adapters from the manifold assembly with the 3/4” Socket/ Socket Wrench.
With the aide of a pick remove the o-rings (48) from each of the adapters.
Install the new o-rings (48) provided with the kit onto each of the adapters.
Reinstall each of the adapters onto the manifold assembly, tighten adapter with 3/4” Socket/ Socket Wrench.
VALVE ASSEMBLY SERVICING
You will need these tools and parts to do the following:
7/8" Socket Wrench or Combination Wrench
Pick
NOTE
A light coating of silicon grease (PN. 21-1122) should be used on all new o-rings and seals.
Use of any other type of grease may result in o-ring or seal failure.
NOTE
A light coating of Anti-Seize Lubricant (PN. 85-0094) should be applied on all threaded parts, unless otherwise stated.