© 2010 Viking Preferred Service
66
Main Back Access
To access the main back:
1.
Remove 5/16” screws securing back guard.
Lift back guard up and out.
2.
Remove 5/16” screws securing side cover and
main back cover.
3.
Remove covers and repair/replace as
necessary.
4.
Reverse procedure to reinstall.
Terminal Block
To access the terminal block:
1.
Remove cover plate
(see Main Back Access
section).
2.
Mark wires and disconnect wiring and power
cord.
3.
Remove screws securing terminal block and
repair/replace block as necessary.
4.
Reverse procedure to reinstall.
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Service Diagnostics and Procedures–Disassembly
Main Back Panel
Side Cover Panel
5/16” Screws
Cover Plate
Screws
Terminal Block
Back Guard
5/16” Screws
