© 2010 Viking Preferred Service
15
Operation
Settings and Functions
Stop Time
(Used in conjunction
with COOK TIME.)
When your cooking
needs require a specific
start and finish cook
time; you would use this function along with COOK
TIME. You will first set the time you want the recipe
to finish then select the length of cook time. The
EOC calculates the required the start time (plus
25 minutes for preheat).
For example:
Let’s say you have a recipe that requires two hours
of cooking at 350°F and you want the cooking
to finish at 6:00 PM. You would first press the
“STOP TIME” button and using the ”SELECTOR
KNOB”, dial in 6:00 PM, then depress the
“SELECTOR KNOB”. The display will automatically
switch to the COOK TIME program. Now dial in
2:00 for two hours of cooking and depress the
“SELECTOR KNOB”. You have now dialed in a
cooking time of two hours and a finish time of
6:00 PM. Now, select a cooking program (Bake)
and temperature (350°)
(See page 16 for Oven
Operation)
. The right display will show the selected
cook program and temperature and the left display
will show STOP TIME - 2:00 – DELAY. The oven will
not start until the desired cook time + preheat time
is reached, in this case 3:35 PM.
To Set Delayed Start:
1.
Press ”STOP TIME”
button. (Current time
will flash and STOP will
illuminate under display.)
2.
Toggle ”SELECTOR KNOB” right to increase or
left to decrease to set desired time. Time will
scroll in one minute increments per individual
toggle. If ”SELECTOR KNOB” is held in either
right or left position, time will increase or
decrease in 10 minute increments until desired
time is reached.
3. Push in ”SELECTOR KNOB” to accept time or
after five seconds, stop
time will auto-accept.
Once accepted, the
illuminated STOP TIME
will go off and COOK
TIME will illuminate under
display. COOK TIME will
display ”0:00”.
4.
Set ”COOK TIME” as detailed in “Cook Time”
on page 14.
5.
Set OVEN FUNCTION and TEMPERATURE
FUNCTION as detailed in ”Set Oven Function
and Temperature” on page 16-17.
Once OVEN FUNCTION and OVEN TEMPERATURE
have been selected and activated, their settings
will be displayed during delay and through the
cooking process. Timer will display programmed
bake time. Below displayed bake time, DELAY
will be illuminated. Pressing
”CLOCK/PROBE” button shows
time while maintaining delay
programming. There will be an
audible beep at one minute
and three long beeps when
time expires (0:00). Pressing the
”CLEAR/SETTINGS” button will
deactivate timer at any time.
CLOCK/
PROBE
OVEN
FUNC
OVEN
TEMP
OFF
CLEAR/
SETTINGS
MIN/SEC
TIMER
COOK
TIME
STOP
TIME
SET
STOP
TIMER NO PROBE
COOK TIME ON DELAY
HR
MIN
AM
PM
02:00
Clock Di
s
play
SET
STOP TIMER NO PROBE
COOK TIME
ON DELAY
HR
MIN
AM
PM
Clock Display
SET
STOP TIMER NO PROBE
COOK TIME
ON
DELAY
HR
MIN
AM
PM
02:00
Clock Di
s
play
