© 2010 Viking Preferred Service
30
User Settings
To adjust settings:
1. Press “CLEAR” and hold 2 seconds to activate.
2. Toggle ”SELECTOR KNOB” right or left to desired setting.
3. When desired setting is flashing, press ”SELECTOR KNOB” to change value.
{°ÊÊ 7 iÊ`iÊÜÌ Ê>`ÕÃÌiÌÃ]ÊÌ}}iÊÌÊ8/°Ê*ÀiÃÃÊ»-/",Ê " »ÊÀʺ"»ÊÌÊiÝÌ°
User Setting
Function
˚F or ˚C
Select Temperature format. Default is ˚F.
12/24 Hr
Select Time format. Default is 12 hr.
Sabbath Mode
Default is OFF. Refer to EOC4 Product Specification. In general, any operation that can change
state based on the door opening (lights, fans, etc.) is disabled. If Sabbath Mode is enabled, display
SABBATH.
Brightness
Select the brightness from 1-5 with 5=brightest setting. Default is 5.
User Offset
Adjust the Temperature Offset. The default is 0. To select, press the
”SELECTOR KNOB”
and
the display shows 00˚F. Rotate the knob as appropriate, the display will increase or decrease
[example: 100˚F or Colder -150˚F] in 50˚F [20˚C] increments. The max offset is +/- 300˚F
[+/- 160˚C]. When done, press the
”SELECTOR KNOB”
to exit. Any User Offset entered is not
applied to the Self-Clean function.
Showroom Mode
Disables heating elements, cooling fan and convection fan motor. Oven lights and all display
functions operate normally.
Exit
Final step in User Settings. From this step, the user can either exit the User Settings (press on the
”SELECTOR KNOB”
) or enter the diagnostic mode
(see page 32)
.
CLOCK/
PROBE
OVEN
FUNC
OVEN
TEMP
OFF
CLEAN/
SETTINGS
MIN/SEC
TIMER
SET
STOP TIMER NO PROBE
COOK TIME ON DELAY
HR
MIN
COOK
TIME
STOP
TIME
AM
PM
CLEAR/
SETTINGS
Diagnostics
