© 2010 Viking Preferred Service
35
Service Diagnostics and Procedures
Advanced Settings (cont.)
Advanced Setting
Function
Display Test (cont.)
Cycle Count
Displays the number of cooking cycles performed. The Main Menu is shown below.
Error Codes
The unit shows the ten (10) most recent errors stored in EEPROM. The Main Menu is shown below.
After Default Error (Component/Cycle) is shown, each toggle of the “SELECTOR KNOB” to the
À} ÌÊÜÊ`ë>ÞÊÌ iÊiÝÌÊiÀÀÀÊV`i°ÊvÌiÀÊÌ iÊ>ÃÌÊiÀÀÀÊÃÊà Ü]ÊÌ iÊiÝÌÊÌ}}iÊÜÊà ÜÊ8/ÊÊ
the display. Depress “SELECTOR KNOB” here will bring you back to the main ERROR parameter.
Ambient
Displays the ambient temperature of the display module. The Main Menu is shown below:
Exit
Final step in the Advanced Settings. Press “SELECTOR KNOB” to exit.
$00,$06/5
$-/$06/5
SET
STOP TIMER NO PROBE
COOK TIME ON DELAY
HR
MIN
AM
PM
SET
STOP TIMER NO PROBE
COOK TIME ON DELAY
HR
MIN
AM
PM
SET
STOP TIMER NO PROBE
COOK TIME ON DELAY
HR
MIN
AM
PM
$:$-&4
Display 1
(Left)
Display 2
(Right)
Press “SELECTOR KNOB” for following Sub-Menus.
Displays
cycle count
Displays
cycle count
Note:
30 seconds have to pass in a cycle before the cycle counter is incremented.
This avoids false counts if the cycle is changed and/or cancled by the user.
Toggle a second time will show EXIT. Depress “SELECTOR KNOB” here will bring you
back to the main CYCLE parameter.
Toggle “SELECTOR KNOB” left to display COOK COUNT or right to exit.
&33034
35%130#&
#",&
SET
STOP TIMER NO PROBE
COOK TIME ON DELAY
HR
MIN
AM
PM
SET
STOP TIMER NO PROBE
COOK TIME ON DELAY
HR
MIN
AM
PM
&33034
Display 1
(Left)
Display 2
(Right)
Press “SELECTOR KNOB” for following Sub-Menus
Displays
cycle count
when last error
occured
STOP TIMER NO PROBE
COOK TIME ON DELAY
AM
PM
Displays
cycle count
when last error
occured
Error description/cycle when error
occured (alternates every 2 seconds).
SET
STOP TIMER NO PROBE
COOK TIME ON DELAY
HR
MIN
AM
PM
".#*&/5
Display 1
(Left)
Display 2
(Right)
Displays
ambient
temperature
of display module
Display 1
(Left)
Display 2
(Right)
SET
STOP TIMER NO PROBE
COOK TIME ON DELAY
HR
MIN
AM
PM
3*()5"--
SET
STOP TIMER NO PROBE
COOK TIME ON DELAY
HR
MIN
AM
PM
Note:
Depress “CLEAR/SETTINGS” at any time will bring you up one step in any diagnostic mode.
