11
Setting F - Future Use (set to 1)
The
1600A
series phone is factory set to automatically start playing the voice
announcement after it has determined the call has been answered. Alternately,
the announcement may be programmed to play after a programmed amount
of time, from 1 to 99 seconds after dialing.
* Note:
If the announcement delay time is used, you must allow enough time for the
1600A
series phone to detect
ring-no-answer and busy signals when using the redial features. The factory default is set to play automatically.
The
1600A
series phones have a built-in non-volatile digital voice announcer that may be used to identify the location of the phone
call. The 16 seconds of digital record time is recorded remotely from a Touch Tone phone. Programming options are as follows:
Dial: A + B + C + D + E + F + # + 1 + 7
Factory Default Setting: 0 + 0 + 1 + 2 + 1 + 0
Two Digit Announcement Delay {
Repeat Announcement Setting
Hang-up on Return to Dial Tone
Double Ring Cadence Mode
Lap Counter
Enter Settings Here:
A B C D E F
#17
If enabled and a busy is detected, the
1600A
series phone will dial the next
programmed speed dial number, and continue to cycle through the numbers until
a call is completed. *
Notes:
This feature is enabled in the factory default setting.
If the busy signal is interrupted with a promotional message, contact your central
office to have it removed.
Setting E - Dial Next Number on Busy
If enabled and a return dial tone is detected, the
1600A
will hang up.
*
Note:
The factory default setting is enabled.
The
1600A
can be programmed to play the announcement from 1-9 times, or
to continuously repeat the announcement every 8 seconds until a Touch Tone
Q
is detected from the distant party. The call connected LED will turn on
automatically after the announcement has stopped repeating.
*
Note:
The factory default for the
1600A
series phone is to play the voice announcement once (digit
1
).
Touch Tone
Setting E
1
Disabled
2
Enabled*
Touch Tone
Setting A/B
00
Play automatically
01-99
1-99 seconds*
Touch Tone
Setting C
0
repeat every 8 secs
1-9
Play 1-9 times*
Touch Tone
Setting D
1
Disabled
2
Enabled*
G. Voice Announcer/Miscellaneous Options
(memory location #17)
Settings A and B - Announcement Delay
Setting C - Repeat Announcement Option
Setting D - Hang Up on Return to Dial Tone
