10
F. Timing/Dialing Options
(memory location #18)
There are six positions in the timing/dialing options. To program these options, enter the six desired timing/dialing
numbers followed by
#18
. The six available timing/dialing options are defined as follows:
Dial: A + B + C + D + E + F + # + 1 + 8
Factory Default Setting: 2 + 3 + 4 + 7 + 2 + 1
Talk/Listen Delay
Call Length
Silence Time Out
Dial Next Number on Ring No Answer
Dial Next Number on Busy
Future Use (set to 1)
Enter Timing/Dialing Settings Here:
A B C D E F
#18
Setting A - Talk/Listen Delay
This feature selects switching time between talk and listen modes (VOX switching time).
Use chart at the right. *
Note:
The factory default is .2 seconds.
Setting B - Call Length Time Out
This feature selects the maximum length of time that calls can be connected. Programmable
in increments of 1 minute up to a maximum of 9 minutes (Touch Tones 1 - 9). Program 0 in
this location to disable the call length time out. With the call length disabled, the
1600A
series phone must rely on a CPC signal, busy signal, silence or return to dial tone to hang-
up. Use chart at the right.
*
Note:
The factory default is 3 minutes.
Setting C - Silence Time Out
This feature selects the length of time that calls will remain connected without voice activity.
Programmable in increments of 10 seconds up to a maximum of 90 seconds (Touch Tones
1 - 9). To disable the silence time out, program 0 in this location. Use chart at the far right.
*
Note:
The factory default is 40 seconds.
Setting D - Dial Next Number on Ring No Answer
If enabled and a ring-no-answer is detected, the
1600A
series phone
will dial the next programmed speed dial number, and continue to
cycle through the emergency numbers until a call is completed.
* Note:
Factory set to redial if not answered after 7 rings.
Touch
Tone
Talk/Listen
Delay
1
.1 sec
2
.2 sec*
3
.3 sec
4
.4 sec
5
.5 sec
6
.6 sec
7
.7 sec
8
.8 sec
9
.9 sec
Touch
Tone
Call Length
Time Out
0
Disabled
1
1 min
2
2 min
3
3 min*
4
4 min
5
5 min
6
6 min
7
7 min
8
8 min
9
9 min
Touch
Tone
Silence
Time Out
0
Disabled
1
10 sec
2
02 sec*
3
03 sec
4
40 sec*
5
50 sec
6
60 sec
7
70 sec
8
80 sec
9
90 sec
Touch Tone
Setting D
1 or 0
Disabled
2, 3, 4... 9
Dials second number after
2, 3, 4...9 rings respectively*
