Viking Electronics 40TB-IP Product Manual Download Page 18

18

Related Products

30AE/35AE Ceiling Speakers

•  Metal white grill for flush mounting in 

office ceilings

•  Mounting hardware included
•  Excellent frequency response
•  The 

35AE

includes a volume control

25AE Paging Horn

•  Adjustable base for easy

mounting and directional
adjustment

•  Compact design for

discreet mounting

300AE Paging Horn

•  30 Watt 8 ohm / 70V

Paging Horn

40AE Ceiling Speakers

•  Attractive with a modern look
•  Flush mounts into a 9.5” to 10”

diameter hole

•  Integral mounting system
•  Excellent sound quality

Control Relay Contacts Across a Local Area Network

Viking Analog Speakers

The 

RC-4A

Network Enabled Relay Controller provides networked control of four relays via an easy-

to-use web interface.  The same interface can be used to check the status of four contact closure
inputs. Relays can be toggled on or off, or user-programmed timed closures can be activated.

The 

RC-4A

can be configured to work as a remote relay for Viking VoIP series entry phones,

controlling door strikes and gates when a remote relay is required for security reasons.  It can also be
programmed to send an email or text message in response to a change in one or more of the sensor
inputs. Two 

RC-4A’s

can be set up so that activity on a sensor input of one unit will automatically

send a message across the network to activate one of the relays on the other unit. Two levels of user
access permit selected users to have full operational and programming rights while others have
operational control but not programming capability. For more info, see 

DOD# 582

Tile Bridge for Ceiling Speakers

The 

SA-TBA

is a tile bridge designed to mount 8 inch loud

speaker and bridges both 2 ft x 2 ft and 2 ft x 4 ft ceiling tiles.
It is compatible with the Viking models 

SA-1S

30AE

35AE

,

and 

40AE

speakers. The 

SA-TBA

tile bridge is constructed

of 24 gauge cold rolled steel with an electro galvanized rust-
resistant finish.

25AE

40AE

35AE

30AE

The 

25AE

30AE

35AE

, and 

40AE

paging speakers provide additional economical paging coverage to existing Viking paging

units (

40-IP, PA-2A

PA-15

PA-30

PA-60

HF-3W

M2W

) or to any system with an 8 ohm output.

In outdoor, factory or warehouse environments, 

25AE

paging horns are the best method of producing understandable sound.

In these environments the directional design allows the installer to focus the sound cone down aisles and toward work areas.

In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 

30AE

35AE

, or 

40AE

speakers in close proximity offer the best distribution and are cost effective. The 

35AE

speakers include a volume control

.

300AE

Summary of Contents for 40TB-IP





















Reviews: