manualshive.com logo in svg

Viking Electronics 40TB-IP, Product Manual, Page: 1 / 20

Share
Download
Viking Electronics 40TB-IP Product Manual Download Page 1

PRODUCT MANUAL

Designed, Manufactured and Supported in the USA

S E C U R I T Y   &   C O M M U N I C A T I O N   S O L U T I O N S

        VIKING

Features

Specifications

www.VikingElectronics.com

•  

PoE powered (class 3, <13 watts)

• 

Use with an optional 

BTR-3

wireless remote to activate calls or adjust speaker volume 

•  Paging prioritization 
•  Plays audio from multicast
•  SIP endpoint or multicast group member
•  Supports up to 10 multicast paging groups
•  Add an optional 

SL-2

blue, green, red or amber strobe light (see 

DOD 242

)

•  

Blue call status LED indicator 

• 

SIP compliant (see page 2 for list of compatible IP-PBX phone systems)

•  

Automatic Noise Canceling (ANC) feature for operation in noisy environments

•  

Viking’s proprietary VOX switching eliminates the need for “Push to Talk” mode

•  

Selectable auto-answer feature for monitoring 

•  Autoprovisioning via Viking programming software  
•  Built-in high efficiency 6 watt class D amplifier

Power:  

PoE class 3 (<13 watts)

Dimensions:  

Overall: 11” x 11” x 4” (279mm x 279mm x 102mm)

Back box: 9.25” x 9.25” x 3.45” (235mm x 235mm x 88mm)

Shipping Weight:  

5.0 lbs (2.27 kg)

Operating Temperature: 

-40°F to 140°F (-40° C to 60° C)

Humidity - Standard Products:

5% to 95% non-condensing

Audio Codecs: 

G711u, G722 and G711a (SIP only)

Network Compliance: 

IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over

Connections: 

(1) RJ45 10/100 Base-T, (1) 8 position terminal block

Sensitivity:

96dB / 1W / 1M S.P. Level

Maximum Output Level: 

105 dB SPL @ 1M (with no additional Spkrs connected)

Amplifier: 

6 watt class D (capable of driving up to five additional 8 ohm speakers

connected in parallel)

           

The Viking model 

40TB-IP

Talk-Back Ceiling/Wall Speaker enables

two-way conversations via SIP and also allows for standard paging
and background music via multicast. The Talk-Back Speaker easily
connects with a single CAT5/6 cable from your PoE switch. Its
shallow depth allows the speaker to be conveniently mounted in a
standard 2” x 4” stud wall or ceiling.

An auxiliary switch input allows a hard wired wall button to initiate a
SIP call. Alternately, an optional wireless remote call button can be
used (Viking model 

BTR-3

, sold separately). A momentary button

press will initiate a standard call, and holding the button for 3 or more
seconds will initiate an emergency call. The remote can also be used
to adjust the speaker volume. The LED on the 

40TB-IP

can be

programmed to blink when there is call activity. 

The integrated microphone enables talk-back and also monitors room
noise to automatically increase speaker volume when necessary.
Line-level audio output connections are provided for connecting to
an external amplifier. Speaker output connections are also provided
to directly drive additional analog speakers. 

•  Relay for activating door locks, strobe lights, external amplifiers, etc. 
•  SIP/Multicast: SIP page, SIP page and zoned multicast stream, zoned multicast receive 
•     Support for access code to prevent unwanted SIP calls
•  Line-level audio output for connecting to an external amplifier
•  Hangs up on: busy signal, time-out, or touch tone command
•  Network remote speaker volume control
•  Can drive additional external analog speakers for greater coverage
•  Mounting: Blind mounts into 9.5” hole, clearance requirement of 3.45” (87.3mm) above

1/2” gypsum board ceiling

•  Heavy duty back box protects speaker and circuitry against plenum dust

•  

Automatic Gain Control (AGC) to automatically increase ring volume to compensate for

ambient noise

•  Diagnostics (for testing mic, speaker & relay)

•  Amplified SIP endpoint or multicast IP paging for: schools, hospitals,

retail stores, office spaces, etc.

•  Provide background music and sound masking
•  Make standard and/or emergency SIP phone calls via hands free

talkback speaker

•  Background music and emergency calls for elevator applications
retail stores, office spaces, etc.
•  No room next to your door for mounting a Entry Phone? Mount the

40TB-IP in the ceiling above the door and use the existing door bell
switch to actvate a call.

40TB-IP

SIP / Multicast Talkback

Ceiling Speaker

September 20   , 2017

IP Ceiling Speaker for SIP Endpoint Paging or Multicast

Paging/Background Music, 

and 

Making Standard 

or

Emergency SIP Calls

Model BTR-3 Wireless
Remote 

(sold separately,

see Page 5)

Applications

Installation requires a Network Administrator / IT Technician

!

Model

40TB-IP

A programmable relay output is provided for activating door locks,
strobe lights, external amplifiers, etc.

Summary of Contents for 40TB-IP





















Reviews:

No comments