VIKING COMPONENTS 33.6K/56K PC CARD USER’S GUIDE
3 Installation
This chapter contains instructions on installing your Viking PC Card fax/modem.
Hardware Installation
The hardware installation is the same for all operating systems unless otherwise
noticed.
Note:
When installing a fax/modem into a Mac OS system, make sure that exten-
sions are on.
Apple PowerBook 520 & 540 Note:
Prior to installing the Viking Components PC
Card Fax/Modem, you must purchase and install an Apple PowerBook PC Card
Drive Adapter - Apple Part Number M2995LL/B. This adapter is available from
Apple and contains the necessary software enabling access to the PCMCIA card
slot. Follow the instructions provided with the package from Apple and then pro-
ceed with the following steps.
Apple Newton Note:
The Apple Newton requires a different installation proce-
dure. Please proceed to page 6, on “
Hardware Installation for the Apple Newton.
”
1. With your computer on, insert the
Viking fax/modem card into the
desired (PCMCIA) PC Card slot
(either the upper or lower). Insert
the corresponding end of the sup-
plied cable into the your wall phone
jack and the other end of the cable
into the Viking modem. Be sure that
the word “
TOP
” on the connector
that inserts into the modem is fac-
ing up.
Chapter 3
5
