Viking Components 33.6K, User Manual

Page: 16 / 53

VIKING COMPONENTS 33.6K/56K PC CARD USER’S GUIDE
Free PPP Setup
The Viking Apple Modem Script is not required for this setup. This setup is for ver-
sion 2.6.2 of Free PPP.
1. Double-click the “ Free PPP Setup ” application.
2. Click the small arrow at the bottom left of the window for the pop-up menu.
Choose “
General ” from the pop-up menu and click the checkbox “ Disconnect If
Idle ” to disable.
3. Choose “ Accounts ” from the pop-up menu and click “ New .” Complete all text
fields under “ Account ” and “ Dialup .” Then click “ OK .”
4. Choose “ Modems ” from the pop-up menu and click “ New .” Give the modem a
name. Select a modem from “ Connected To .” Set the port speed to 115200. Add
the AT Command: AT&FW2+MS=12,1 to the init string setting for V.90 preferred
and click “ OK .”
5. Click “ Open TCP/IP .” The “ Connect Via ” pop-up menu should have “ Free PPP ” cho-
sen and the “ Configure ”pop-up menu should have “ PPP Server ”chosen. Complete
the text fields “ Server Address ” and “ Search Domains. ” Close and click “ Save .”
Your software installation and setup is now complete.
Chapter 3 13