VIKING TECHNICAL SUPPORT 1.800.908.0884
4 8
VIKING EXPANSION PRODUCTS
VIKING SOLAR KIT
The components included in this package
are intended to provide sufficient power for general applications.
Part# VA-SOCHP
This Kit includes the following components:
(2)
12V 40W Solar Panels
Part# VA-SO40W
(wired in series = 24V 80W)
(2) 12V 35Ah batteries
Part# DUBA35
(wired in series = 24V 35Ah)
(1)
Solar Charger
Part# SOCHR10
(1)
Solar Power Harness
Part# SOHAR
!
NOTE:
The number of cycles achieved from this kit are dependent upon
the following and may require increased panel and battery capacities:
• Power consumption of all accessories being used
• Average solar radiation of geographic location
VIKING AC SURGE PRO
Adds another layer of protection to
the high voltage power supply of your gate operator. Connecting the AC
Surge Pro in parallel to the EMI Board, provides a dual layer of protection
from surges up to 20,000 Volts / 10,000 Amps.
Part# VA-SURGEPROAC
VIKING MONITOR
Off-site access to operator diagnostics and
perform firmware updates from just about anywhere with cellular service.
With the Viking Monitor App, this tool allows you to monitor and label
multiple operators by site and location for quick reference. Provides error
notifications, operator status, settings and diagnostic information.
Part# VA-MONITOR
***Q-7 & ECU Operators require ( 1) Antenna Extension Cable (part# VA-RPSMA)***
VIKING KONNECT Primary/Secondary Kit
Secure
and reliable Primary/Secondary communication between two single gate
operators or ECU’s using Viking’s Konnect technology.
Part# VA-KONNECT-MS
***Q-7 & ECU Operators require (2) Antenna Extension Cables (part# VA-RPSMA)***
*** NOT COMPATIBLE for Solar Mode setting on Control Board***
