manualshive.com logo in svg

Viglen vig830s, User Manual, Page: 72 / 77

Share
Download
Viglen vig830s User Manual Download Page 72

V1.0                                   Vig830S Motherboard Manual 

71 

4.14 Intel® Active Management Technology (AMT) 

Intel® Active Management Technology (Intel® AMT) is a hardware based solution that uses out-
of-band communication for basic management of client systems. Even with a crashed hard drive, 
a locked operating system, or if a system is turned off, access is still available to perform basic 
system management tasks

.

 

 

Intel

® 

AMT Basic Functions 

A web browser can be used to perform basic management tasks on Intel AMT client systems. 
The web server built into Intel AMT enables administrators to: 
 

•  View the system status. 
•  View the hardware installed in the system. 
•  View, start/stop, and clean the Intel AMT event log. 
•  Remotely power the computer on or off (when enabled in the client system BIOS). 
•  View and manage Intel AMT network parameters. 
•  View and manage Intel AMT user accounts.

 

 

System Requirements 
 
Client System 

The client system must be a computer with Intel® PRO Network Connections that includes Intel 
Active Management Technology. The operating system loaded on the client system does not 
matter. 

 
Console System 

The console system (i.e., the system used to access the Intel AMT client system) must have one 
of the following web browsers installed: 
 
• Microsoft* Internet Explorer 6 SP1 or newer 
• Netscape* Navigator 7.1 or newer 
• Mozilla* Firefox* 1.0 or newer 
• Mozilla Mozilla* 1.7 or newer 

 

4.14.1 Configuring an Intel AMT Client System for the 
First Time 

Before configuring the client system, have the following information available to configure Intel 
AMT properly: 
 
• A computer name 

In Microsoft Windows*, right-click My Computer, click Properties, and click the Computer 
Name tab. 

 
• Terminal Communication Protocol / Internet Protocol (TCP/IP) 
Settings 

In Windows, open the Control Panel, open Network Connections, and right click the 
connection and clickProperties. Click TCP/IP and click Properties. 
 

• Virtual Local Area Network (VLAN) settings. 

If a VLAN is set up, the VLAN ID will be needed. 
 
 

 
 
 
 

Summary of Contents for vig830s














































































Reviews:

No comments