manualshive.com logo in svg

Viglen vig830s, User Manual, Page: 5 / 77

Share
Download
Viglen vig830s User Manual Download Page 5

V1.0                                   Vig830S Motherboard Manual 

4 

Chapter 1: Motherboard Overview

 

 
 

Introduction 

 

This  manual  describes  the  Viglen  Vig830S  motherboard  inside  your  computer.    The 
motherboard is the most important part of your computer.  It contains the CPU, memory 
and graphics circuitry that make the computer work in the correct manner. 

 

The  Vig830s  motherboard  is  a  Micro  ATX  form  factor  offering  legacy  to  premium 
features.  PS/2  mouse/keyboard  combo  port,  integrated  Graphics  via  VGA,  DVI, 
DisplayPort  and  HDMI,  High  Definition  Audio  via  3  flexible  audio  jacks  and  integrated 
10/100/1000  network  connection,  as  well  as  4  USB  2.0  and  2  USB  3.0  ports  to  enrich 
your multimedia creation experience. 
 
The Vig830s Motherboard supports 6th generation Intel Core i3, i5, and i7 processors, as 
well as being Microsoft Windows 7, 8.1 and Windows 10 WHQL certified. 
 
This  manual  contains  technical  information  about  the  Viglen  Vig800s  motherboard  and 
other  hardware  components  inside  your  computer.  If  you  are  new  to  computers  we 
recommend that you read the user guide first. If you are an experienced computer user 
this manual should provide all the information you will need to perform simple upgrades 
and maintenance.   
 
We hope  that  this manual  is both  readable and  informative.  If  you  have  any  comments 
for  suggestions  about  how  we  could  improve  the format  then please  fill  out  the form  at 
the back of the manual and send it to us. 
 
Above all we hope that you enjoy using your Viglen computer.  

Summary of Contents for vig830s














































































Reviews:

No comments