Viglen vig830s User Manual Download Page 61 | Manualshive

Page: 61 / 77

Viglen vig830s User Manual Download Page 61

V1.0 Vig830S Motherboard Manual

60

4. 8. 8 Platform Misc Configuration

The items in this menu allow you to configure the Platform Misc.

PCI Express Native Power Management [Disabled]

Allows you to enhance the power saving feature of PCI Express and perform ASPM operations in the
operating system. Configuration options: [Disabled] [Enabled]

Native ASPM [Disabled]

The item appears only when you set the previous item to [Enabled] and allows you to enable or disable
ASPM. Configuration options: [Enabled] [Disabled]

4.8.9 Serial Port Console Redirection

Console Redirection [Disabled]

Enables or disables the console redirection feature. When enabled, it allows you to maintain a system from
a remote location by redirecting keyboard input and text output through the serial port. Configuration
options: [Enabled] [Disabled]

Console Redirection Settings

The following items become configurable only when you set the previous item to [Enabled].

Out-of-Band Mgmt Port [COM0 (DISA...]

Microsoft Windows Emergency Management Services (EMS) allows for remote management of a
Windows Server OS through a serial port. Configuration options: [COM0 (Disabled)] [COM1
(Disabled)] [COM2 (Pci Bys0, Dev0, Func0) (Disabled)]

Terminal Type [VT-UTF8]

VT-UTF8 is the preferred terminal type for out-of-band management. The next best choice is
VT100+ and then VT100. Configuration options: [VT100] [VT100+] [VT-UTF8][ANSI]

Bits per second [115200]

Allows you to select the transmission speed of the serial port. Configuration options: [9600] [19200]
[57600] [115200]

Flow Control [None]

Flow control prevents data loss from buffer overflow. This item allows you to set the flow control.
Configuration options: [None] [Hardware RTS/CTS] [Software Xon/Xoff]

4. 8. 10 Onboard Devices Configuration

HD Audio Controller [Enabled]

[Enabled]

Enables the HD Audio Device.

[Disabled]

Disables the HD Audio Device

Front Panel Type [HD]

Allows you to set the front panel audio connector (AAFP) mode to legac

y AC’97 or highdefinition audio

depending on the audio standard that the front panel audio module supports.
[HD]

Sets the front panel audio connector (AAFP) mode to high definition audio.

[AC97]

Sets the front panel audio connector (AAFP) mode to legacy AC’97

Intel LAN Controller [Enabled]

[Enabled]

Enables the Intel LAN controller.

[Disabled]

Disables the controller.

Intel PXE OPROM [Disabled]

This item appears only when you set the previous item to [Enabled] and allows you to enable or disable the
PXE OptionRom of the Intel LAN controller. Configuration options: [Enabled][Disabled]

«
...
59
60
61
62
63
...
»

Summary of Contents for vig830s














































































Reviews:

No comments