Vigitron MaxiiNet Vi30126 Series, Operation Manual

Page: 46 / 126

Page | 46
What does the priority list do? When the switch detects the power usage
is above 550 Watt (400 Watt for Vi35126), it will begin disabling ports,
until the usage goes down to safe levels again. The switch will start
disabling ports with low priority, and move towards the higher priority
ports. To reenable the disabled ports, user will need to log into switch to
re-enable the ports in the “PoE settings” page.
NOTE:
In the default mode, Port 1 is given the highest priority
and port 24 the least.
10.2 PoE Event
Counter
PoE Event Counter Definitions
E0: Port Overload (ICUT) Event
E1: Port Short Circuit Limit (ILIM) Event
E2: Port MPS Error (DC Disconnect) Event
E3: Port Severe Short Circuit Event
E4: Port Thermal Shutdown Event
E5: Port Temperature Limit Event
E6: Main Power Overload Event
E7: PoE Auto Check Timeout Event