Vigitron MaxiiNet Vi30126 Series, Operation Manual

Page: 31 / 126

Page | 31
Section 8: Operation of Web-Based Management
8.0 Initial
Configuration
This chapter instructs you on how to configure and manage the Vi30126
through the web user interface. With this facility, you can easily access
and monitor through any one port of the switch and all the status of the
switch, including MIBs status, each port activity, Spanning tree status,
port aggregation status, multicast traffic, VLAN and priority status, even
illegal access record and so on.
The default values of the Vi30126 are listed in the table below:
IP Address 192.168.1.133
Subnet Mask
255.255.255.0
Default Gateway 192.168.1.254
Username admin
Password system
After the Vi30126 has been finished configuration, you can browse the
interface. For instance, if you type
http://192.168.1.133 in the address
row in a browser, it will show the following screen and will ask you to
input in the username and password in order to login and access
authentication.
The default username is
“admin”
and password is
“system”
. For first
time use, please enter the default username and password, and then
click the
<Update> button. The login process now is completed. In this
login menu, you have to input the complete username and password
respectively, the Vi30126 will not give you a shortcut to username
automatically. This looks inconvenient,
but it’s the safer option.
The Vi30126 supports a simple user management function to allow only
one administrator to configure the system at any one time.
The use of
simultaneous administrators could result in unpredictable operation.
Additional users, even with administrator’s identity, should only monitor
the system. Those who have no administrator’s identity can only monitor
the system. It is suggested, regardless of security level, that viewing is
limited to one client at a time. Also, after accessing the Vi30126 and
viewing is complete, log out.
Connections involving the input of routers and use of clients accessing
servers, the internet, or other networks can result in
a brief disconnection
of client's access to the switch GUI . It is recommended that after
programming or monitoring, clients log out and that users without
administrator access be allowed only a minimal access period.