Vigitron MaxiiNet Vi30126 Series, Operation Manual

Page: 105 / 126

Page | 105
19.6 SNMP Trap States
This screenshot shows how the switch was configured and on the right side of the screen,
how the trap messages are display. The switch IP address is 192.168.1.13380. The switch
uses SNMPv1. The time and date displayed are from the host computer.
SNMP will deliver the following messages:
“PoE_On Port xx”
“PoE_Off Port xx”
“SecurPort: TxRx Disabled Port xx”
“E0: Port Overload (ICUT) Event on Port xx“
“E1: Port Short Circuit Limit (ILIM) Event on Port xx”
“E3: Port Severe Short Circuit Event on Port xx”
“E4: Port Thermal Shutdown Event on Port xx”
“E5: Port Temperature Limit Event on Port xx”
“E6: Main Power Overload Event on Port xx”
“E7: PoE Auto Check Timeout Event on Port xx”
“Power Budget: Budget Exceeded, disabled Port xx”
“PSE Overload Protection: Disabled Port xx”
“Traffic Detected Port xx” (Exception: Vi30126, Vi35126)
“Loss of Traffic Detected Port xx” (Exception: Vi30126, Vi35126)
“Authentication Failure: This message is sent when someone tries to login
with incorrect information
.”
“Cold Start: This message is sent when the PoE Switch is powered up.”
“Warm Start: This message is sent when the PoE Switch is rebooted form
the GUI.”