str
23
aSSeMBLy anD preparation for USe
Unwind power cable completely from the cable storage ❼.
Place the device on a flat, firm and non-slip surface.
Make sure that the socket is easily accessible.
Clean the appliance following Chapter „Cleaning and maintenance“.
Plug the power cord into the socket. Display lights up and a signal makes a sound.
WarninG - property DaMaGe!
Never operate the appliance empty! It may be irreparably damaged.
WarninG - riSk of injUry!
If the appliance is hot, touch it only at holders ❶. The risk of burns!
Pour about 5 liters of water into the machine and let it cook 20 minutes (see „Turning On and Off“). Then pour
this water out.
notiCe
The first time the device may emit a slight smell. This odor is harmless and will disappear after a short time.
Ensure adequate ventilation, for example, open a window.
USinG tHe DeviCe
tUrninG tHe DeviCe on anD off
1) Turn the knob „temperature“ ❺ to set the desired temperature. You can adjust the temperature in
increments of 1 °C. Every 5 °C signal sounds. The set temperature is displayed in the „set temperature“ ❾.
2) Set the desired preserving time in minutes using the knob „minutes“ ❻. This time can be set in 1 minute
increments. Every 5 minutes, a signal sounds. The set time is displayed in the „minute“ ⓫ part of the display.
3) Press the button for heating START / STOP ❺. Device will begin to heat up. Heating displaysvia increase
of column „ “. On display in the „current temperature“ ❿ there is displayed the current heating
temperature. Once heating is completed, a signal sounds, the display shows „ “ and begins to countdown on
display in part „minutes“ ⓫.
notiCe
Display backlight will after approx. 5 minutes, turn off automatically after the last turn one of the knobs.
Turn the knob, the display turns on again.
After the set time signal sounds. The device is switched off. „ “ and „ “ disappears from the display.
notiCe
For interruption of heating or preserving, press START / STOP ❺.
4) When not in use, always disconnect the power plug.
