Black-White Pattern (Figure 9)
1.5 Function Test and Alignment Procedure
1.5.1 All Modes Reset
You should do “All Mode Reset”
(Refer to Chapter III-3. Hot Keys for Function Controls) first.
This action will allow you to erase all end-user’s settings and restore the factory defaults.
1.5.2 Auto Image Adjust
Please select and enter
“
Auto Image Adjust
”
function on Main Menu to see if it is workable. The
“
Auto Image
Adjust
”
function is aimed to offer a better screen quality by built-in ASIC. For optimum screen quality,
the user has to adjust each function manually.
1.5.3 Firmware
Test Pattern: Burn In Mode
(Refer to Chapter III-3. Hot Keys for Function Controls)
- Make sure the F/W is the latest version.
1.5.4 DDC
Test Pattern: EDID program
- Make sure it can pass test program.
27
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VG712s/b
Summary of Contents for VG712b
