www.lorexbaby.com
BB1811AC1_Quick Start Guide_R1
Page 1
1-20022013
ADD-ON CAMERA
BB1811AC1
QUICK START GUIDE
x1
x2
x1
x2
x2
What’s Included
Getting Started
1
2
1
2
Make sure all power cables are at least 3ft / 1m
away from the crib and out of reach of your child.
Place the camera and monitor next to each other. Make sure the
monitor and the camera are turned on.
Pairing the Camera with Your Monitor
Press
on the monitor to open the on-screen menu.
Use the arrow keys on the monitor (
) to select the channel
you would like to pair the camera to.
NOTE:
If a camera is already connected to the channel you
selected, the new camera will replace the existing camera.
3
Connect the power adapter to the
camera and then to a power outlet.
Slide the power switch to ON.
4
5
NOTE:
This camera is wall mountable.
Please see the User’s Guide provided with
BB1811 for details.
NOTE:
Immediately move the camera away from the monitor
to avoid speaker feedback.
TIP
Use the arrow keys on the monitor (
) until the
following display can be seen then press
.
Press the
button on the monitor to begin pairing.
The LINK LED will start flashing.
Press the PAIR button on the back of the camera.
6
NOTE:
If pairing was unsuccessful, repeat the pairing process
described above starting with step 2.
Use the included cable clips to help keep
power cords out of reach of your child.
Cable clips
PAIR button
Images from the camera are immediately shown on the
monitor once the camera is successfully paired.
Press
twice to exit menu.
7
