3)
4 bolts black coats which the inside lining squeeze out, take
down the inside lining black cover(Figure 21)
4)
Based on the coding switches shown as Figure 2, set up the
protocol used by the camera and the baud rate as per the state
according to Table 2. Check the address of the camera to see if it is
matched with that you need. If not, set the address of the dome
camera at corresponding position as per Table 1
open
Takes down the inside lining black cover
Figure 20 Figure 21
5)
Installs the inside lining black cover(Figure 22)
6)
Installs the transparent
vitreous cover (Figure 23)
Close
Installs the inside lining black cover
Figure 22 Figure 23
7)
Take out the cover of the wall-installed bracket(Figure 24)
-23232323
23
Summary of Contents for VC-EX861
Page 41: ...37373737 37...
Page 42: ...CCTV SYSTEM...
