ViewSat PVR7000 User Manual Download Page 13

: It is the longitude of the selected satellite. It is set automatically as the 

selected satellite. And you can enter the position value using numeric 
keys.

: It means the longitude of your location. You can select the value using 

the left/right keys(

◀∙▶)

or numeric keys.

: It means the latitude of your location. You can select the value using the 

left/right keys(

◀∙▶

) or numeric keys.

* 1.3(USALS) only.

Sat Position 

Longitude

Latitude

: Input the frequency of the transponder you want to find manually.
: Input the symbol rate of the transponder you want to find.
: Select the polarization of the transponder you want to find. In the case of
horizontal, 18V and in the case vertical, 13V are output through LNB line.
: Select the FEC of the transponder you want to find. You can select the
value of 1/2, 2/3, 3/4, 5/6, 7/8 or auto.

Freq.
S/R
Polarity

FEC

8.3.B. CHANNEL SCAN 

It will be more convenient to use Channel Scan procedure when you want to search channel
for a specified transponder offered from the satellite. 
As in Antenna SetupChannel Scan also searches all channels broadcasted over a
specific transponder using its predefined information.
You can add a new transponder if you cannot find it on the predefined transponder list.
Select Channel Scan menu in Installation menu, and the following screen will be displayed.

8.3.B.1 Channel Scan
Select the desired satellite using the left/ right keys
(

◀∙▶

).

Select the Antenna Configuration icon using the
browse keys( 

▲∙▼

,

◀∙▶

).

Select the LNB Setting using the left/right keys(

◀∙

) then you can set LNB Power, LNB Type, LNB

Freq., 22KHz with left/right keys(

◀∙▶

) at each field.

Press EXIT key and set Search Option, DiSEqC1.0
fields to the appropriate value using the left/right
keys(

◀∙▶

) at each field. 

Check the signal strength and press EXIT key.

Select the Search/Edit TP icon using the left/right keys(

◀∙▶

). 

Press OK key and select the desired transponder using the up/down keys(

▲∙▼

). Press OK

key to start the scan procedure for selected transponder.
You can see the progressive status of channel searching.

If you cannot find the desired transponder from the transponder list, you can add it by
inputting appropriate parameter values for a new transponder using the       key. 
When you want to change the parameter of an existent transponder, select the parameter
using the        key, change its value and press the EXIT key.
Correctly set various parameters. 
When you want to delete newly added transponder, delete the transponder using the 
key. And you can add your own transponder using the       key.
Press the MENU key or EXIT key to return to previous menu.

8.3.B.2. Add Satellite
You can add a new satellite. Select the Add Satellite icon using the left/right keys (

◀∙▶

)

and press the OK key. Select the Search/Edit TP icon using the left/right keys(

◀∙▶

). Press

the OK key and add a new transponder using the       key. You should set various
parameters of the transponder. The default name of the added satellites is “User SAT-No”.

8.3.B.3. Delete Satellite
You can also delete the user satellite. Select the satellite that you want to delete from the
satellite list. Select the Delete Satellite icon using the browse keys ( 

▲∙▼

,

◀∙▶

).

Press the OK key, and the selected satellite will disappear.

8.3.C. CHANNEL COPY

This function provide you with transferring channels
from tuner A(B) to tuner B(A).
Select the DirectionTuner A >>> B or Tuner B
>>> A 
using the left/right keys(

◀∙▶

).

Then select the Transfer menu and press the OK
key. If you copy channel A >>> B, you  connect the
same satellite of tuner A to tuner B. Then, It will work
in Tuner B. Press the MENU key or EXIT key to
return to previous menu.

F1

F1

F2

F3

F4

22

23

Summary of Contents for PVR7000





























Reviews: