9
6167 818 - 10
Vitodens 100-W, B1HE/B1KE Combi Installation/Service
General Information
Product Information
Vitodens 100-W, type B1HE, B1KE
Wall mounted gas condensing boiler with Inox-Radial
heat exchanger and the following integrated components:
Modulating MatrixPlus burner for natural gas and LPG
Hydraulics with 3-way diverter valve and high
efficiency circulation pump
Type B1KE: Plate heat exchanger for DHW heating
Weather-compensated or constant temperature control
unit
The Vitodens 100-W B1HE is available as a gas condensing
boiler for the connection of one DHW tank or as a gas
condensing combi boiler B1KE with an integral plate heat
exchanger for DHW heating. For the connection of
heating circuits and the DHW tank or the DCW/DHW piping
for the B1KE, see installation examples starting on page 33.
In the factory set condition, the Vitodens 100-W is set
up for operation with constant boiler water temperature.
By connecting an outdoor temperature sensor (included
with installation accessories), the boiler can be operated in
weather-compensated mode.
The following are integrated: closed loop hydraulic system
with 2 connections for heating system supply and return,
and 2 connections for DHW tank heating (B1HE) or on
demand DHW heating (B1KE).
These boilers are only intended for installation in close
loop heating systems.
The rating plate of the boiler contains extensive product
information and an boiler-specific Access code with
the marking “i” for direct access to product-specific
information and product registration on the internet.
The access code contains the credentials for the
registration and product information portal, as well as
the 16-digit serial number.
Note:
A further label with the access code is enclosed
with the boiler.
Affix the label in the installation and service
instructions so it can be easily found again for
later
use.
A
Rating plate with access code for boiler registration
Rating plate
