Requirements:
n
The pipe end is not bent or damaged.
n
The pipe is deburred.
n
The correct sealing element is in the press connector.
EPDM = polished black
n
The sealing element is undamaged.
n
The sealing element is completely in the bead.
Push the press connector onto the pipe as far as it will go.
Mark the insertion depth.
Place the press jaw on the press machine and push the retaining
bolt in until it clicks into place.
INFO! Observe the press tool instruction manual.
Open the press jaw and place on the press connector at right
angles.
Check the insertion depth using the marking.
Ensure that the press jaw is placed centrally on the bead of the
press connector.
Handling
Easytop ball valve with SC-Contur
19 from 21
