Cut the pipe properly using a pipe cutter or fine-toothed hacksaw.
Avoid grooves on the pipe surface.
3.2.3
Pressing the connection
NOTICE!
Leaky press connections due to pipes being too short
If two press connectors are to be mounted onto a pipe
without an interval, the pipe must not be too short. If the
pipe is not inserted up to the prescribed insertion depth in
the press connector during pressing, the connection may
become leaky.
In the case of pipes with a diameter of d 15–28 mm, the
pipe must be at least as long as the total insertion depth of
both press connectors.
Handling
Easytop ball valve with SC-Contur
18 from 21
