3 Handling
3.1
Assembly information
3.1.1
Permitted exchange of sealing elements
Important instruction
With their material-specific qualities, sealing elements in
press connectors are adapted for use with the corre‐
sponding media and/or the areas of use of the piping sys‐
tems and are generally only certified for them.
The exchange of a sealing element is generally permitted.
The sealing element must be exchanged for a spare part
designed for the intended application
„Sealing elements“ on page 11. The use of other sealing ele‐
ments is not permitted.
3.1.2
Mounting instructions
Do not remove the model from the packaging until immedi‐
ately before use.
System components may, in some cases, become damaged through
transportation and storage.
n
Check all parts.
n
Replace damaged components.
n
Do not repair damaged components.
n
Contaminated components may not be installed.
Observe the following when mounting:
n
Use suitable tools.
n
Installation is not dependent on the direction of flow.
Choose the place of installation so that the fitting is easily
accessible, simple to operate and the insulating shell can be
mounted without any problems.
Checking system components
During assembly
Handling
Easytop ball valve with SC-Contur
15 from 21
