background image

Operating temperature [T

max

]

110 °C

Operating pressure [P

max

]

1.6 MPa (16 bar)

Scope according to applicable regulations, see 

Ä

 „Regulations from

section: Technical data“ on page 7

n

Operating temperature: 90 °C

n

Operating pressure: PN 10 (10 bar)

2.4

Information for use

2.4.1

Corrosion

Overground pipelines and fittings in rooms do not normally require

external corrosion protection.
There are exceptions in the following cases:

n

Contact with aggressive building materials such as nitrite or mate‐

rials containing ammonium

n

In aggressive surroundings

If external corrosion protection is required, observe the pertinent guide‐

lines, see 

Ä

 „Regulations from section: Corrosion“ on page 8

.

Easytop fittings made of gunmetal/silicon bronze are suit‐

able for all types of potable water.
The chloride concentration in the medium must not exceed

a maximum value of 250 mg/l.
This chloride is not a disinfectant, but in fact pertains to the

content in sea and table salt (sodium chloride).

2.5

Optional accessories

The following optional accessories are available:

n

actuating lever made of metal

n

Easytop thermometer

n

Easytop media marking

n

Protective caps for the actuating lever made of plastic in red and

green for the identification of the corresponding area of use

n

Insulating shells

Product information

Easytop ball valve

11 from  15

Summary of Contents for 2270.2
















Reviews: