Chapter 3: Configuring VidyoPanorama
39
Configuring the Network
To configure the network:
1.
Select the Admin page Configuration tab.
2.
If needed, click the blue triangle next to the word
Network
to view the network settings.
3.
Select the
DHCP
or the
Static
radio button.
DHCP
is the default. If you select
Static
, you must enter this information:
The static IP address you will be using.
The subnet mask.
The default gateway.
The primary DNS server.
The NETBIOS name.
The workgroup name.
Setting the Video Encoding Resolution
To set the video encoding resolution:
1.
Select the Admin page Configuration tab.
2.
If needed, click the blue triangle next to the words
Video Encoding Resolution
to view the video
encoding settings.
3.
Select the
720p
or the
1080p
radio button.
1080p
is the default (1080p/60, that is).
4.
Select the encode bitrate from the
Encode Bitrate
dropdown list.
4 Mbps
is the default. Only
2 Mbps
,
4 Mbps
, and
6 Mbps
are supported with this release of
VidyoPanorama version 1.0.
5.
Select the number of encoding layers from the
H264-SVC Encoding Layers
dropdown list.
If you expect mostly room systems and hardly any mobile participants in your VidyoPanorama
calls, select 2 to save upstream bandwidth. 2 is the default.
If you expect a lot of mobile participants in your VidyoPanorama calls and you have enough
bandwidth, select 3. This will add about ½ MB to 1080p/60 calls, but it makes it a better
experience for mobile participants.
Do not select
1
; it is notsupported with this release of VidyoPanorama version 1.0.
