Call Recorder PRI manual © 2009-2019 Vidicode®
58
8.3
The CryptoCard and its PIN and PUC code
The CryptoCard is supplied with a PUC code and a PIN code. The PIN code is a four-
digit code and is requested to enable playback of recordings. The PUC code is a
twelve-digit code and is used only when the card has been disabled. The PIN code
can be changed with the Call Recorder. This can be done only when the Use
CryptoCard function has been enabled. See § 4.2 to enable the use of a CryptoCard.
Press the
function key
Press
SYSTEM
Press
NEXT
several times.
Press
CHANGE
to change the card code.
First enter the original card code.
Press CONTINUE.
Enter the new card code.
Press CONTINUE.
Repeat the new card code for confirmation.
Press CONTINUE.
NOTE!
A CryptoCard allows for two invalid PIN code entries. After the third invalid Pin
code entry the CryptoCard is disabled. The next time the Call Recorder will ask for
the PUC code to enable the card again. The CryptoCard allows for four invalid PUC
code entries. After the fifth invalid PUC code entry the Call Recorder will disable the
card definitively. It is advised to keep the PUC code in a safe place.
8.4
Making an encrypted recording
To make an encrypted recording it is essential that the Use CryptoCard function is
enabled in the Recorder settings menu. Enable the Use CryptoCard function as
described in § 4.2. With Use CryptoCard enabled it is no longer possible to make
Change Card Code
NEXT
CHANGE
STOP
