Vidicode PRI, Manual

Page: 25 / 90

Call Recorder PRI manual © 2009-2019 Vidicode® 25

Stop + Start

Save rec.

Start + Save

E-mail rec.

Start + E-mail

Off
When “ Start ” is selected a recording must be started manually. It will not be
started automatically unless it is on the whitelist. When the recorder was not yet
recording because it was on the whitelist, the beginning of the call is not recorded.
When the Notification message is enabled, a Notification will be sent to the caller.
When “
Stop ” is selected a recording can be stopped. When the call was being
recorded, it will have been recorded from the start until it stopped recording.
When “
Start/Stop ” is selected a recording can be started and stopped must be
started manually. It will not be started automatically unless it is on the whitelist.
When the recorder was not yet recording because it was on the whitelist, the
beginning of the call is not recorded. When a Notification message is enabled, a
Notification will be sent to the caller. Note: It is not recommended to combine this
option with existence of a whitelist or a blacklist because the user may not know if
the call is already recording and therefore may stop the recording by mistake if he
wants to start recording.
When “
Stop/Start ” is selected a recording can be stopped and started. All calls are
recorded automatically from the start. When a Notification message is enabled, a
Notification will be sent to the caller. Note: It is not recommended to combine this
option with existence of a whitelist or a blacklist because the user may not know if
the call is already recording and therefore may stop the recording by mistake if he
wants to start recording.
When “
Save ” is selected in the option the current call is permanently saved and
excluded from the AutoDelete function.
When “
E-mail ” is selected the recording is E-mailed according to the e-mail-list.

Press
NEXT
to continue in the menu with the
[ ] Action
setting or press
STOP to exit the configuration menu.
4.8 [ ] Dialing
When not recording, the user can select an external line, hear a dial tone, and then
send a command to the Call Recorder. The command will either be
or + two
an optional telephone number.