67009600-EN - Edition 2015 - Rev. 1.0
57
VX2300 Digital System - “2 Wire” Audio/Video Door Entry System
VX2300 Digital System - Installation handbook
OPERATION
DURING STAND-BY
Camera recall
Press a number of times equal to the ID value of the door panel to switch ON.
When the connection is made, press again to end the call.
Intercommunication call
Press as many times as the extension number (intercommunication with units in the same apartment) or address value
to call (intercommunication with units in a different apartment).
Active bus relay board Art. 2305
Press this button quickly as many times as the address value of the relay (1 “beep” for each press).
Privacy service
Press to enable the privacy service. The LED “ “ turns on. The service is deactivated by pressing again the same button or
when the programmed time expires.
Melody volume
Press to increase or decrease the melody volume.
DURING A CALL
Answer a call
Press to answer the call and start the conversation.
Open the door
Press to activate the door open relay of the outdoor unit and end the connection. The “ “ LED will flash then the unit
returns to stand-by mode.
Active bus relay board Art. 2305
Press this button quickly as many times as the address value of the relay (1 “beep” for each press).
Reject the call
During an incoming call, press this button to reject the call. The visitor doesn’t receive any warning of the call rejected.
DURING A CONVERSATION
End conversation
Press to end a call.
Activate “Push to Talk” mode
Keep pressed to activate simplex “Push to Talk” mode: press
and keep pressed to talk, release the button to listen.
Open the door
Press to activate the door open relay of the outdoor unit. The “ “ LED will flash.
Active bus relay board Art. 2305
Press this button quickly as many times as the address value of the relay (1 “beep” for each press).
Camera switch button
If the door station uses the Art. 4303N plus the Art. 4330N or the Art.4302N/NR, pressing this button during a conver-
sation switches the video signal coming from the camera module to the video signal coming from the camera module
input for external camera. During the conversation, press the button and the camera switches (If no camera is connected
you will see a black screen). Repeat the operation to switch back to main camera.
Speech volume adjustment
Press then use “
“ or “
“ buttons to increase or decrease the speech volume (1 “beep” for each press).
Picture brightness adjustment
Press then use “
“ or “
“ buttons to increase or decrease the picture brightness (1 “beep” for each press).
LED’S
Door open LED
Indicates if the door is open (requires an additional wire).
Privacy service LED
Indicates if privacy service is enabled or disabled.
Art. KRV782
Hands free videomonitor for VX2300 digital system)
