25H/SP/DDA/2W - TECHNICAL MANUAL
EN-UK - V.1.2 - 04/01/16
22
VIDEX
25H/SP/DDA/2W
(1 way “2 wire” DDA audio intercom kit)
Upload
From the top menu on the main programmer screen
when ‘Upload’ is selected the following drop down
menu will appear
(as shown on the right)
. From the
drop down list the following options are available:
• Upload All -
select this option from the drop down
menu to upload all the information entered into
the ‘settings’ and ‘apartment’ windows.
(Once the
‘Upload All’ option has been selected from the drop
down list the ‘master code’ window will appear, as
shown on the right. The ‘master code’, ‘connected
to’ and ‘firmware version’ options will all be greyed
out as these options are not applicable when using
the UIM-138 display module. Simply click on the
‘start’ button to upload or the ‘cancel’ button to exit
out of this option. Please note that when uploading the display will show ‘please wait’ and a progress bar will
be shown on the second line of the display, once complete it will then display ‘OK’ and then revert to the new
message).
• Upload Only Blocks -
select this option from the drop down menu to upload information relating to a
specific block
(the block number from the drop down list, as shown below, relates to the block ID entered into
the Block ID field in the ‘apartments’ window as described on page 19. This option is generally used on larger
multiple entrance systems where an Art.2206N bus exchange device has been used. In most cases the ‘Upload
All’ option described above would be used)
.
The block ID in this field relates to
the block ID number in the block ID
column in the apartments ‘tab’.
