57
Figure 4-11
z
File length: upload file length. When setup is larger than the actual file length, system
will upload the whole file. When setup here is smaller than the actual file length,
system only uploads the set length and auto ignore the left section.
z
Interval: in each channel, system only uploads the first video file in accordance with
video type (alarm/motion detection) during the same period. For example, when
interval value is 5 minutes, system only uploads the first motion detection or alarm file
in each 5-minute.
z
When interval value is 0, system uploads all corresponding files.
z
Period 1 and period 2: you can set two periods for one each channel.
System file name is shown as in Figure
4-12
.
Figure
4-12
4.3.5.4 NTP
You need to install SNTP server (Such as Absolute Time Server) in your PC first. In
Windows XP OS, you can use command “net start w32time” to boot up NTP service.
In Figure 4-6, select NTP and then click properties button. You can see the following
interface. See Figure 4-13.
z
Host IP: Input your PC address.
z
Port: This series DVR supports TCP transmission only. Port default value is 123.
z
Update interval: minimum value is 15(Unit: minute)
z
Time zone: select your corresponding time zone here.
Here is a sheet for your time zone setup.
City /Region Name
Time Zone
London GMT+0
Berlin GMT+1
Cairo GMT+2
Moscow GMT+3
New Deli
GMT+5
Bangkok GMT+7
Beijing (Hong Kong)
GMT+8
