23
Figure 2-1
2.6.2 Connecting Video Output
This section provides information about physically connecting video display devices to the
DVR. See Figure 2-2.
If you connect the DVR with a TV monitor or VGA monitor, the DVR can automatically
detects the monitor type. And without any output device, by default, the DVR is configured
to use a TV monitor. In this case, if your application requires a VGA monitor, you have to
press the button
“
FN
”
or Shift on the front panel.
NOTE:
Video output 1 and VGA can
’
t display at the same time. But Video output 2 can display
properly with Video Output 1 or VGA.
Figure 2-2
