39
Playback or search in the redundant disk.
There are two ways for you to playback or search in the redundant disk.
z
Set redundant disk(s) as read-only disk or read-write disk (Main menu->Advanced-
>HDD management). See Figure 3-13.System needs to reboot to get setup activated.
Now you can search or playback file in redundant disk.
z
Dismantle the disk and play it in another PC.
3.5
Motion Detect
4.5.1
Go to Motion Detect Menu
In the main menu, from Setting to Detect, you can see motion detect interface. See
Figure 3-14.
4.5.2
Motion Detect
Detection menu is shown as below. See Figure 3-14.
z
Channel: select the channel you want to implement motion detection.
z
Type: in the dropdown list, select motion detection item.
z
Record channel: select the channel to activate recording function once alarm occurred.
Please make sure you have set MD record in encode interface(Main Menu->Setting-
>Schedule) and schedule record in manual record interface(Main Menu->Advanced-
>Manual Record)
z
Enable tour: Here is for you to activate tour between different cameras.
z
Latch: when motion detection complete, system auto delays detecting for a specified
time. The value ranges from 10-300(Unit: second)
z
PTZ preset: Click set button, the interface is shown as in Figure 3-15.Here you can set
preset for one or more channels.
z
Region:
click
“
select
”
button to set motion detection region. See Figure 3-16.
z
Sensitivity: there are six levels. The six-level is of the highest sensitivity.
z
Alarm output: when alarm occurred, system enables peripheral alarm devices.
z
Show message: System pops up message in the screen to alert you once alarm
occurred.
Please highlight icon
to select the corresponding function.
After all the setups please
click save button, system goes back to the previous menu.
Note:
In motion detection mode, you can not use copy/paste to set channel setup since the video
in each channel may not be the same.
In Figure 3-15, you can left click mouse and then drag it to set a region for motion
detection. Click Fn to switch between deployment and withdraw motion detection. After
setting, click enter button to exit.
