Videotec MAXIMUS MHX, Instruction Manual

Page: 20 / 268

EN - English - I
nstruc
tion manual
18 MNVCMHX_1706_EN
6.4.3 Fixing the unit to the pole mount
adapter or corner mount adapter
To install the product on a pole or at a wall corner,
first of all fix the unit to the wall bracket (6.4.2 Bracket
mounting, page 17).
6.4.3.1 Fixing with pole mount
Fix the wall bracket to the pole mount adapter
using 4 washers, 4 stainless steel grower washer
and 4 hexagon stainless steel bolts (A4 class 70)
M10x30mm.
Make sure the thread are free of dirt and debris.
Apply a generous amount of thread locking
compound (Loctite 270).
Tighten the screws.
Pay attention to the fixing. Tightening
torque: 35Nm max.
The thread compound must cure for one hour, allow
for this period prior to completing the installation.
Fig. 10
6.4.3.2 Fixing with corner adapter
Fix the wall bracket to the corner mount adapter
using 4 washers, 4 stainless steel grower washers
4 hexagon stainless steel bolts (A4 class 70)
M10x30mm.
Make sure the thread are free of dirt and debris.
Apply a generous amount of thread locking
compound (Loctite 270).
Tighten the screws.
Pay attention to the fixing. Tightening
torque: 35Nm max.
The thread compound must cure for one hour, allow
for this period prior to completing the installation.
Fig. 11
6.4.4 Adjusting the protection grid
The protection grid may be adjusted moving it
upwards, to fit it with the field of view of certain
cameras.
Fig. 12