Videotec HOV, Instruction Manual

Page: 13 / 84

Instruc
tion manual - English - EN
11 MNVCHOV32_1702_EN
Open the housing as described in the relative chapter
(6.1 How to open the housing, page 7).
Fix the support bracket (02) using the screw (01).
Place the power supply (03) on the support bracket.
Secure it all with the screws (04) and the corner fixing
bracket (5).
04
02
03
05
01
Fig. 10
Plug the multipolar female connector into the
corresponding male connector (J7, 6.3 Board
description, page 8).
Fig. 11
7.3 Blower
7.3.1 Blower installation
Not usable in versions with double filter for
air renewal and wiper.
Pay attention to the voltage used to power
the circuit. Depending on requirements use
the correct power supply kit.
The blower kit should be assembled
according to the instructions to ensure a
correct air circulation inside the housing.
Open the housing as described in the relative chapter
(6.1 How to open the housing, page 7).
Fix the blower using the corner bracket and screws.
01
02
Fig. 12
Plug the multipolar female connector into the
corresponding male connector (J8, 6.3 Board
description, page 8).