Videon Shavano, Product Manual

Page: 18 / 19

3. Hardware Reset Instructions Page 18
3. Hardware Reset Instructions
To reset all settings, including the network settings and device name of a Videon device, there
exists a full hardware reset function. Use the physical reset button on the front of the device
opposite the connectors to complete this process.
1. Power off the device by disconnecting it from external power.
2. Hold in the stream button.
3. While holding in the stream button, power on the device.
4. Hold the stream button for at least 30 seconds while the device is powering on. The LED
will flash blue 5 times once reset is complete.
5. Upon successful hardware reset, the following values will be set as default.
Default Configuration Values
Configuration Page Element Default Value
Encoder Video Input Resolution Auto-Detected
Encoder AV Input Type HDMI with Embedded Audio
Encoder Video Scaling Passthrough
Encoder Limit to 30 FPS OFF
Encoder Encoding Mode Variable Bitrate
Encoder Video Encoding Type H.264 (AVC)
Encoder Video Encoding Value 10000 kbps
Encoder Audio Encoding Type MPEG-4 AAC-LC
Encoder Audio Encoding Value 128 kbps
Encoder RTMP Output OFF
Encoder Multicast Output OFF
Encoder Unicast Output A OFF
Encoder Unicast Output B OFF
Encoder Record to USB OFF
Encoder Filename VID
Encoder Upload Recorded USB Files OFF
Encoder Delete file from USB after upload OFF
Device Settings Name vunit-xx
Device Settings Encoder ON
Device Settings Network Settings DHCP