1. Setting up your Videon device(s)
Page 6
1.3 Connecting Your Videon device(s)
We recommend completing all hardware connections before powering on your device.
1. Connect the video source to the device’s HDMI IN port with an HDMI cable, or the SDI
IN port with an SDI cable. Connect an audio jack to the device’s AUDIO IN port to use
analog audio, rather than embedded audio.
2. Connect the device’s Ethernet port to the router with an Ethernet cable.
3. Connect the control computer to the router with an Ethernet cable.
4. Plug one end of provided power supply into the device’s 12V connector and plug the
other into the wall. This will power on the device. Alternatively, use Power over Ethernet
to power the device. Be sure to use a PoE switch.
1.4 Connection Diagram
1.5 Final Setup
Verify that the following components of your installation are turned on:
•
Video source
•
Control computer
•
Router
