ANTIVANDAL OUTDOOR IP SPEED DOME CAMERA /
MPEG4 with Motion Tracking
45/95
⑪
Configure the IP Speed Dome’s TCP/IP settings as you would any other PC on your network,
providing a proper IP address, subnet mask, default gateway, and DNS server.
If this is standalone unit with a direct connection to a cable/DSL/Broadband modem then
input the addresses you have received from your ISP. If you received no IP address from
your ISP, please select Dynamic or PPPoE and choose the proper settings.
⑫
The IP Speed Dome utilizes five TCP ports - a Web Server Port for utilizing Internet Explorer, a
Video Server Port, a Control Server Port, Audio ports. A Web Server Port is for utilizing
Internet Explorer, a Video Server port is to support the streaming video, and a Control Server
Port is to transmit to control command. Also Audio Port are to transmit and to receive Audio
data. If this IP Speed Dome will be directly attached to a cable/DSL/Broadband modem or has
been assigned a static IP from your ISP, then leave the default port settings. If you are installing
the IP Speed Dome on a network, you must define a Web Server Port other than 80. The other
ports, a Video Server Port, a Control server Port, Audio Ports can remain unchanged.
⑬
If the IP Speed Dome is connected to a network which utilizes a router, you must have Port
Forwarding configured on your personal router to forward all ports to the IP address you have
assigned the IP Speed Dome.
⑭
After configuring Port Forwarding on your router (if necessary), you may then access your IP
Speed Dome on your local network by opening Internet Explorer and specifying the IP
address and Web Server Port that you have assigned to the IP Speed Dome.
Examples: http://192.168.0.200:8888 or http://24.106.88.123
If you left your Web Server Port set to 80, then you don’t need to specify the port in the
Address Bar when accessing your IP Speed Dome.
⑮
Access your IP Speed Dome via the Internet :
If you used a static IP address assigned by your ISP
i) Open Internet Explorer.
ii) Type the IP of the IP Speed Dome.
iii) If you use a router, type the routers’ static IP and the web port number of the IP
Speed Dome.
If you have a dynamic address provided by your ISP
i) Open Internet Explorer and visit the DDNS website.
ii) Register the IP Speed Dome.
iii) Reboot the IP Speed Dome.
iv) Give the DDNS server 2 minutes to locate your IP Speed Dome’s IP information.
v) Click the refresh button in the Internet Explore.
vi) After your camera is connected, select your camera.
NETWORK SETUP
5
