ANTIVANDAL OUTDOOR IP SPEED DOME CAMERA /
MPEG4 with Motion Tracking
22/95
Preset
Function
Max. 127 positions can be stored as Preset position. The Preset number can be assigned
from 1 to 128, but 95 is reserved for starting OSD menu.
Camera characteristics (i.e. White Balance, Auto Exposure) can be set up independently
for each preset. Label should be blank and "Camera Adjust" should be set to "GLOBAL" as
default. All characteristics can be set up in OSD menu.
Set Preset
<Set Preset> [1~128]
Run Preset
<Go Preset> [1~128]
Delete Preset
To delete Preset, use OSD menu.
VST
Function
By using VST function, you can make camera to move between 2 Preset positions repeatedly.
When VST function runs, camera moves from the preset assigned as the 1st point to the
preset assigned as the 2nd point in CW(Clockwise) direction. Then camera moves from the
preset assigned as the 2nd point to the preset assigned as the 1st point in
CCW(Counterclockwise) direction.
In case that the preset assigned as the 1st point is same as the preset assigned as the 2nd
point, camera turns on its axis by 360
in CW(Clockwise) direction and then it turns on its
axis by 360
in CCW(Counterclockwise) direction.
Speed can be set up from 1
/sec to 180
/sec.
Set VST
To set VST, use OSD menu.
Run VST
Method 1) <Run Pattern> [VST NO.+10]
Method 2) <Go Preset> [VST NO.+140]
ex) Run VST 3 : <Run Pattern> [13]
ex) Run VST 3 : <Go Preset> [143]
Delete VST
To delete VST, use OSD menu.
1st Preset
2nd Preset
1
CW
Dir
ec
tio
n
2
CC
W
Dir
ec
tio
n
OPERATION
3
