ANTIVANDAL OUTDOOR IP SPEED DOME CAMERA /
MPEG4 with Motion Tracking
10/95
Parts Name & Functions
Thermostat
Fan
Thermostat
TiltMotor
Inner cover
Zoom Module
Dome Cover
PanMotor
Sunshield
DomeHousing
BracketMount
Base
BracketUpper
Cover
Seal
Housing Upper Cover
BracketJoint
PCB
Shield Mount
Heater
Thermostat
Fan
Thermostat
TiltMotor
Inner cover
Zoom Module
Dome Cover
PanMotor
Sunshield
DomeHousing
BracketMount
Base
BracketUpper
Cover
Seal
Housing Upper Cover
BracketJoint
PCB
Shield Mount
Heater
Main Unit / Wall Mount Bracket
Dome Cover
Do not detach protection vinyl from dome cover before finishing all
installation process to protect dome cover from scratches or dust.
Wall Mount Bracket
Wall bracket option. After making all the connections to the PCB, fit the
junction box cover with the four screws.
Cabling Terminal Block
During installation, Power, Video, Communication, Alarm Input cables
are connected on to this cabling terminal block.
DIP Switch
Adjusts camera ID and protocols.
Ethernet Connector
This RJ-45 connector is for network connection and designed to operate
on 10 or 100 Mbps.
Reset Switch
Return all settings to their factory defaults. Care must be taken since
you will lose all data made previously.
ACTIVE LED
When in use, this Yellow indicator should always be flashing or
flickering. During reboots or power cycling, it may take several seconds
for the unit to initialize and illuminate the indicator.
INTRODUCTION
1
