ANTIVANDAL OUTDOOR IP SPEED DOME CAMERA /
MPEG4 with Motion Tracking
28/95
Display Setup
Display Setup
**Highlight the item to modify and key: NEAR
Use the joystick to change the setting and key: NEAR to save or FAR to cancel.
Set date/clock
From the display setup menu,use the joystick to highlight SET
DATE/CLOCK and key: NEAR
Highlight the item to modify and key : NEAR
Move the joystick up and down to change an individual value and left
and right to move to the previous next value.
Key:NEAR to save or FAR to cancel.
This menu defines Enable/Disable of OSD display on Main Screen. If an
item is set to be AUTO, the item is displayed only when the value of it is
changed.
Camera ID
[ON/OFF] shows camera ID according to the
DIP switch settings, eg CAM1
PTZ Information
[ON/OFF/AUTO]shows the current pan/tilt
position and degrees and the current zoom
level
Action Title
[ON/OFF/AUTO]shows current speed dome
action, eg PRESET3.
Preset Label
[ON/OFF/AUTO]shows preset title (if defined)
when a preset is called.
Alarm I/O
[ON/OFF/AUTO]shows real time status of the
alarm inputs and outputs.
<Set Date/Clock>
Sub menu to change the date and time
<Privacy Zone>
Sub menu to setup the speed dome privacy
zone.
HOW TO USE OSD MENU
4
DISPLAY SET UP
--------------------------------------
CAMERA ID
ON
PTZ INFORMATION
AUTO
ACTION TITLE
AUTO
PRESET LABEL
AUTO
ALARM I/O
AUTO
DATE/CLOCK
ON
<SET DATE/CLOCK>
<PRIVACY ZONE>
BACK
EXIT
SET DATE/CLOCK
--------------------------------------
DATE 07/JAN/2007
CLOCK 08:37:15
BACK
EXIT
