• High voltage alarms: The number of high voltage alarms.
5.6. Trends
The “Trends” section of VictronConnect enables datalogging, but only while VictronConnect is connected and communicating with
the SmartShunt. It will simultaneously log two of the following parameters: voltage, current, power consumed Ah or state of
charge.
5.7. LED Status codes Bluetooth module
The Bluetooth status LED (blue) and an the error LED are both associated with the Bluetooth interface.
• On power-up, the blue LED will blink, and the red LED will quickly flash. The red LED will give a short flash to confirm that the
red LED is functional.
• When the blue LED is blinking, the Bluetooth interface is ready to be connected to the VictronConnect App.
• When the blue LED stays on, the Bluetooth interface has successfully connected to VictronConnect App via Bluetooth.
See below table for an overview of all possible LED combinations of the Bluetooth module and their meaning.
Table 1. LED indications Bluetooth module
Blue LED
RED LED
Operational
state
Connection
state
Description
Slow blinking
Off
VE.Direct
gateway
Not connected
Ready for connection via Bluetooth
On
Off
VE.Direct
gateway
Connected
Bluetooth successfully connected
On
On
VE.Direct
gateway
Connected
VE.Direct communication problem.
Slow blinking
Slow blinking
VE.Direct
gateway
Not connected
VE.Direct communication problem.
Double flash
Double flash
VE.Direct
gateway
Not connected
Confirmation that the PIN code has been
cleared
Fast blinking
and
alternating
with red LED
Fast blinking
and
alternating
with blue LED
Firmware
update
Not connected
Red and blue LED are alternating - The
firmware needs to be updated
On
Fast blinking
Firmware
update
Connected
The firmware is being updated
On
Slow blinking
Firmware
update
Programming
The firmware is being updated
Manual - SmartShunt
Page 15
Operation
