Operator’s Manual Victory FMM Series
- Page 38 of 54 -
Version 2.0
8.2
Service
Fluids and Lubricants
◼
Use only a hand-held grease gun filled with Grade Type II grease.
◼
Store lubricants in an area protected from dust, moisture, and other contaminants.
Greasing
◼
Use a hand-held grease gun for all greasing points.
◼
Wipe grease nipple with a clean cloth before greasing to avoid injecting dirt and grit.
◼
Replace and repair broken nipples immediately.
◼
If nipples do not take grease, remove and clean them thoroughly; clean the lubricant
passageway. Replace nipples if necessary.
◼
The yellow stickers with a grease
gun indicate where the essential
grease nipples are.
◼
Locate the grease nipples on the
PTO
shaft’s universal joints and
pump several shots of high-quality
grease into the grease nipples.
