42
Pre-Ride Inspections
Rear Brake Pedal
1. Press downward on the rear brake pedal. It
should move freely and smoothly. It
should not move more than 3/8 inch (8
mm) before resistance is firm. It should
continue to feel firm, without loss of pres-
sure, until the pedal is released.
2. Release the pedal. It should return to its
rest position quickly when released.
3. If the rear brake pedal fails to perform as
stated or travels too far before beginning
to engage the brake, service the brakes
before riding.
4. See page 34 for rear brake pedal adjustments.
Rear Brake Fluid Level
The rear brake fluid reservoir is located near the rear
brake pedal, just inside the right lower leg fairing.
View the reservoir from the front right side of the
vehicle.
1. Position the motorcycle on level ground in the
fully upright position.
2. View the brake fluid through the reservoir.
3. The fluid should be clear. Replace cloudy or con-
taminated fluid.
4. The fluid level should be between the minimum
and maximum marks on the reservoir. Add brake
fluid as needed. See page 75.
Resistance at 3/8 inch (8 mm)
Maximum
Mark
Minimum
Mark
