120
CB Radio / ICOM System
Local/Distant CB Radio Mode
To change mode
settings, enter the
mode menu. Press
(+) or (-) on the
console panel to
set the CB to local
(LO) or distant
(DX) mode. Press S/E to save and exit.
Distant:
Use this setting for weaker signals.
Receiver sensitivity will be increased. Static
and noise levels are increased.
Local:
Use this setting for stronger signals
or in high density areas. Receiver sensitivity
will be decreased. Static and noise levels are
decreased.
CB Radio Frequencies
The FCC has designated 40 citizen band (CB) channels for consumer use. Channel 9 is des-
ignated as an EMERGENCY channel for emergency use only.
CB Channels / Frequencies
ICOM System
Press and release
ICOM on the left
control to activate
the intercom sys-
tem.
When the intercom
system is active, ICOM will display on the
console screen.
VOX Break Setting
The intercom is opened and closed using a
voice-operated switch (VOX). The volume
sensitivity level required to open the inter-
com can be adjusted using the VOX sensi-
tivity setting.
Press and hold
ICOM on the
upper left control
to access the VOX
sensitivity set
screen.
CB LO / DX MODE
DISTANT
CB LO / DX MODE
LOCAL
+
-
+
-
Ch.
Freq.
Ch.
Freq.
Ch.
Freq.
Ch.
Freq.
Ch.
Freq.
Ch.
Freq.
1
26.965
8
27.055
15
27.135
22
27.225
29
27.295
36
27.365
2
26.975
9
27.065
16
27.155
23
27.255
30
27.305
37
27.375
3
26.985
10
27.075
17
27.165
24
27.235
31
27.315
38
27.385
4
27.005
11
27.085
18
27.175
25
27.245
32
27.325
39
27.395
5
27.015
12
27.105
19
27.185
26
27.265
33
27.335
40
27.405
6
27.025
13
27.115
20
27.205
27
27.275
34
27.345
7
27.035
14
27.125
21
27.125
28
27.285
35
27.355
FM
ICOM
CB19
92.5
